|
|
Reinforced concrete structure
Hubačková, Pavlína ; Jeneš, Rostislav (referee) ; Šulák, Pavel (advisor)
My bachelor thesis focuses on the design of selected parts of monolithic reinforced concrete structures of a department store. Elements for design are locally supported ceiling sab, column and foundation pad. The calculation of internal forces was performed in a computational program SCIA Engineer 17. The Results of the software are compared with the result of the simplified manual method. The settlement of foundation was performer in program GEO 5. A graphical documentation of selected elements is also a part of the thesis. The construction is designed and assessed according to ČSN EN 1992 - 1 - 1.
|
|
|
Steel load-carrying structure of production hall with bridge crane
Štulrajterová, Terézia ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
This bachelor thesis deals with the design and assessment of a steel load-bearing structure of a two-aisle production hall. That hall has a rectangular ground plan of a width 32 m (20 + 12 m) and lenght 54,54 m (9 modules distanced 6 m from each other). The main aisle is 10 m high and inside is located a overhead crane with carrying capacity 5 t. The second aisle is used as a storage area for materials that have already been produced. The skeleton of production hall is made of a ten transversal bindings. Lattice trusses are hinged mounted on constraint pillars of solid poles. The hall is situated in the north of the Czech Republic in the city of Děčín.
|
|
|
Static analysis of reinforced concrete roofing of platform
Popovič, Tomáš ; Strnad, Jiří (referee) ; Zich, Miloš (advisor)
The thesis deals with the static solution of reinforced concrete roofing of bus platform. It is a monolithic reinforced concrete frame structure, which is consisting of circular pillar and girder. The girder has the general shape. The board is double-sided embedded into girder. The loads acting on the construction are transmitted to the foundation soil using reinforced concrete foundation blocks. The content of this thesis is based on the dimensioning of individual elements of the support structure according to ČSN EN 1992-1-1. These elements are dimensioned for the ultimate limit state. The main outputs of this static calculation are drawings of shape and drawings of reinforcement.
|
|
|
Production hall
Londa, Jan ; Pilgr, Milan (referee) ; Sýkora, Karel (advisor)
This thesis deals with steel structures of industrial building with the arrangements of the building with a span of 18 m, a length of 18 m and a corresponding height of cantilever of a crane track girder is 6,6 m. In the hall are considered two cranes with a capacity of 20/5 t and 32/8 t. The structures is designed for the district of Olomouc.
|
|
|
Reinforced concrete structure of the railway platform roofing
Vodová, Pavla ; Bažant, Zdeněk (referee) ; Šulák, Pavel (advisor)
The bachelor‘s thesis deals with assessment of existing damaged reinforced concrete strucutre of the railway platform roofing according to the original project documentation. Apart from assessment of existing structure, there is prepared a design of two alternative solutions. The first alternative is a remediation of damage structure with description of appropriate diagnostic methods for testing concrete structures and with description of technological process of implementation of remediation. The second alternative is design of completely new structure instead of existing one. This new structure is designed as a monolithic frame contruction with restraint reinforced concrete panel and one – step foundation block. In this bachelor’s thesis there were prepared a design and assessment of sub – sections and work – out appropriate drawing documentation. All static assessments are calculated according to ultimate limit state.
|
|
|
Overpass bridge across the highway
Černý, Pavel ; Šopík,, Leonard (referee) ; Nečas, Radim (advisor)
The topic of this thesis is detailed design of the supporting structure of a bridge. Three variants are designed. The structure is designed as a single beam bridge of 6 spans. The calculation of load efects make in software MidasCivil 2019 and Scia Engineer 18.1. The subject of the expertise of the structure is service limit state and ultimate limit state. For evaluation of cross sections is used MS Excel. Both design and relevant drawing documentation of the bridge deck and substructure. The design and assessment are according to the europien standards.
|
|
|
The Steel Structure of the Car Schowroom
Pelechová, Denisa ; Šmak, Milan (referee) ; Buchta, Stanislav (advisor)
The master’s thesis treat of design and appreciation load-bearing steel structure of Motor Show. The object is situated on the lokality Brno. Structure is composed of rolling sections and tubes. Overall height of the structure is 17,395 meters and overall lenght is 32,60 meters. Cross link iscomposed of arched girders panel that are supported on fixed pillars. Theoutside links are composed of panel columns. Load is composed of self weight, additonal imposed load, payload and climate load caused by wind and snow that is reached for given locality.Static rewiew comes out from previous load and it has been accomplished by Scia Engineer 2008 and hand computation.
|
|
|
Monolithic multi-storey wall building
Vymazal, Jakub ; Šulák, Pavel (referee) ; Bažant, Zdeněk (advisor)
Final thesis with tittle: "Monolithic multi-storey wall building" is processeed as a project documentation according to valid assesment. The object is located in the city of Boskovice, 35 Hybešova street. Its ground plan dimensions are 52,8m x 12,5m. Total height of object is 22,3m including roof-wall, measured from the level of base chink. There are enclosed balconies on the south direction. Movement between floors is ensured by 2-flighted stairs. Object is It is made of reinforced concrete. It is designed as 6-floor bulding with a flat roof. The main supporting construction is created by system of walls and reciprocally asigned ceilings, which are sticked together. Walls are designed as pillars. The building is assigned to a belt bases. Module dimensions are 8,7m in longitudinal direction and 5,2m in transversal direction. Height dimension is 3,0m. The thesis is dealing with the 1st upper floor.
|
|
|
Pillar jib crane
Manda, Pavel ; Malášek, Jiří (referee) ; Pokorný, Přemysl (advisor)
This bachelor thesis deals with the construction design of pillar jib crane with lifting capacity 1.300 kg, crane radius 3.000 mm and maximum lift 7.000 mm. The thesis contains design of supporting elements including strength analysis, assembly drawing of pillar jib crane and jib’s detail drawing. The thesis also deals with choice of suitable hoist.
|
|
|
Design of the speed-way bridge structure
Nádvorník, Ondřej ; Rybák, Vít (referee) ; Klusáček, Ladislav (advisor)
This Master's thesis deals with the detailed design of the supporting structure of the bridge with two sections, with the rise in the direction of the intermediate support, and cross-cut single-beam construction. The supporting structure is designed from the prestressed concrete, prestressing losses are accurately quantified. It also deals with the assessment of pillar base threshold and pilot groups. The assessment was carried out according to the limit states.
|
guest ::
